Basic Functions of Safety Shoes

Anti-puncture insole safety shoes are a general term for safety shoes and protective shoes, also known as labor insurance shoes. Generally refers to shoes that protect the feet and legs from foreseeable injuries in different working environments. Safety shoes mainly include toe-protecting anti-smashing shoes, insulating shoes, anti-static shoes, conductive shoes, steel shoes, rubber shoes, cold-proof shoes, etc.

Basic functions of safety shoes

Anti-smash

According to the industry standard (ld50-94), the inner lining of the toe safety shoes is steel toe, which has the characteristics of anti-static pressure, anti-impact, anti-puncture, and anti-smashing. very safe. After inspection, the pressure resistance is 10kN, and the impact resistance of the toe cap is 23kg. After the impact hammer falls freely from a height of 450mm, the deformation gap in the shoe is greater than 15mm. It is mainly used for leather shoes in heavy industries such as mines, machinery, construction safety, metallurgy, steel, and port lifting. It can protect the toes and is supported by rubber and elastomer. Wearing Comfortable to wear without affecting daily labor operations.

Anti-puncture

Protects the soles of the feet from sharp objects and can withstand a puncture force of 1100n.

Antistatic

Antistatic leather shoes are produced according to the GB4385-1995 standard, and the resistance value is between 100k'Ω and 1000m'Ω. It is mainly used in aviation, aerospace, the dangerous chemical industry, and other industries to avoid flammable and explosive accidents caused by static electricity.

Oil resistance

According to the oil resistance standard test, the volume increase shall not exceed 12%. According to GB/T 3903.1, after bending 40,000 times, the volume does not increase but decreases, the decrease is greater than 0.5% of the original volume or the hardness increase is greater than 10 (Shore A), and the crack expansion is not greater than 7mm.

Non-slip

Rubber bottom, excellent anti-skid performance. Acid and alkali resistance - meet the requirements of GB12018-89 standard.

Insulation

When working on electrical equipment with AC 50Hz, 1000V, and below or DC 1500V and below, it can be used as auxiliary safety equipment and leather shoes for labor protection products. Wear-Resistant - High-quality rubber sole, suitable for various environments.

Cold protection

Cold-proof shoes are used to protect the feet of low-temperature workers from frostbite. Waterproof shoes are used in workplaces where there is water or splashes on the ground.